|
|
|
PAINTED DOORS
The quality of finish is not limited to our standard Frosty White but, for a minimal upcharge, a multitude of colors are available. Our wide range of door designs, either simple or complex, complemented by colour choices provides personal individuality for the discerning consumer. The quality and beauty of the Softouch door can be enjoyed for many years through a simple regimen of care.
COLORS
All Sunoka pricing is based on the usage of a paint specially formulated to yield a color equivalent to Wilson Art “Frosty White #1573-60 unless otherwise specified.
Raw doors, depending on their design can be ordered with a melamine back but are subject to an upcharge. See the price pages for details.
All Sunoka doors can be painted in a variety of solid finishers: from Matte (30 Degree) to High-Gloss (90 Degree). See price pages for details and finishes available.
We can match customer supplied colors (laminate color chips specifically Wilson Art are preferred) for and additional cost over and above the Sq.Ft. prices indicated on any particular door style plus a charge for any excess paint. See the price pages for details. Dark colors are subject to quote.
Metallic finishes are available in six colors: Ascot Green, Brown Irid, Silver Irid, Sandstone Irid, Champagne Irid, and Kenya Beige. Metallic finishers are subject to quote.
SUNOKA RADIUS DOORS:
How To Order Radius Doors
- Indicate the door style, edge detail and finish. Not all designs are available on radius doors.
- Indicate if the door is to be convex on concave.
- Two radii are available and these are 12” (1/4 circle) and 18” 1/8 circle) and are calculated to the center of a ¾” Thick door and to a maximum height of 44”.
- Indicate the quantity of the doors you desire.
- Indicate the height of the doors desired, Sunoka pre-determines the width
- If required, Sunoka will supply a template for cabinet construction. If you have not previously used these curbed doors, request a template.
DIMENSIONAL TOLERANCES
- Thickness for painted doors unless specified to different substrate will be 23/32 +/- 1/64” (19.05 mm. +/- 0.4 mm.)
- Door sizes have a tolerance of plus or minus 1/32” (0.80 mm.).
- A twist or warp of up to 1/16” (1.6 mm.) shall not be considered a defect.
- For doors over 24” (610 mm.) wide or 60” (1270 mm.) height, a twist or warpage of up to ¼” (6.35 mm.) will be allowable.
- FLAT PANEL OR V-NOTCHED DOORS are not covered for twist or warpage if the height exceed 31” (787 mm.) and/or the width exceed 20” (508 mm.) and will require a sighed waiver form the customer acknowledging acceptance of this condition
PRICING
All pricing is done by the square foot and is calculated by rounding up the height and width dimensions to the nearest ½”. There is a minimum on square footage charge per piece.
PAINTED DOORS ARE PRODUCED IN THE FOLLOWING MANNER:
Raw Door Process
- Each door is manufactured exclusively using a substrate (raw or melamine backed) which is a premium grade MDF. This premium boar has been selected because of its stability, machinability and its compatibility with our chosen paint system.
- The doors are sized, squared and routed on a CNC machining center equipped with diamond tooling to ensure accuracy of profiles and door sizes.
- After removal from the routers, the doors have their corners and back edges broken and are ready to receive their first coat of primer either by Sunoka or an outside customer.
PAINTED DOOR CARE & REPAIR
Cleaning
Due to their quality, painted products require minimal care. Use a soft, absorbent cloth, dampened with lukewarm water to wipe off dust and fingerprints. For greases or other difficult stains, use mild hand soap.
Never use abrasive cleaning material, furniture polishes or bathroom cleaners that leave a build-up or film on the surface.
Micro Repair Procedure For a painted Door
- Remove the door from the cabinetry and place horizontally on a clean and secure surface.
- Clean around the area to be repaired making certain its dry and free of dirt or grease. (Note: do not use harsh cleaners)
- Using a small (fine) artist’s paint brush, dab on a small amount of touch-up pain, only enough to fill the chipped area. (Note: do not take more than a few seconds for this step, as the paint will start to set-up.)
- Let repair area sit for approximately ten minutes. If necessary repeat step#3 until the chip is filled to the surface of the door.
- To aid in dry time, a hair dryer can be used for a few minutes, keeping it approximately 20 inches away from the door, set on medium, then allow the door to cool for twenty minutes.
- Replace the door, repair is complete. Note: Touch -up kits are available, see the price pages for details.
|
|
